Set Of 12 Genuine Oem Motorcraft Fl910s Engine Oil Filter

Product Description:

Specification:

 Genuine OEM Motorcraft FL910S Engine Oil Filter Ford BE8Z6731AB

Details:

Brand and Model:

Brand: Motorcraft; Model: FL910S

Applicable Vehicle Models:

It is mainly suitable for various models under Ford, such as some models of Ford Focus (2003-2013), some models of Ford Fiesta (2011-2014), Ford Kuga, Ford Edge, Ford Mondeo, Ford Explorer, Ford Mustang, etc. It is also applicable to some models like Lincoln MKZ. It covers engines with various displacements including 1.0L, 1.5L, 1.6L, 2.0L, 2.3L and 2.5L.

Product Type:

It is a spin-on oil filter, belonging to a full-flow oil filter. It can filter impurities in the engine oil during the operation of the engine to ensure the cleanliness of the oil.

Specifications and Packaging:

In terms of external dimensions, the outer diameter is approximately 76.2mm, the height is approximately 89.66mm, and the connecting thread is 3/4"-16. It is packaged in individual units with a carton as the outer packaging, and there are 12 units per carton.

Materials:

The shell is made of metal, which is coated to prevent rust.

The filter material is a mixed material of cellulose and polyester, featuring good filtering performance and strength.

The sealing ring is generally made of nitrile rubber.

Components such as the bypass valve and check valve are mostly made of a combination of materials like metal and rubber.

Structural Features:

It adopts a bypass valve design. When the viscosity of the oil increases at low temperatures or the filter is clogged, the bypass valve opens to ensure the normal supply of oil to all components of the engine.

A check valve made of silica gel is installed to prevent oil from flowing back after the engine is turned off, thus avoiding dry friction when the engine is restarted.

The internal filter material is pleated to increase the filtering area.

The central tube is made of tinned steel, which has high strength and can withstand oil pressure.

Installation Requirements:

Before installation, ensure the vehicle is turned off and cooled down. Drain the old oil completely, then clean the filter mounting base with a rag to remove sludge and impurities.

Apply a uniform layer of clean oil to the sealing ring of the new filter. Align the filter with the threaded opening of the mounting base, and gently screw it in clockwise by hand first.

After the sealing ring touches the base, use a special tool to tighten it appropriately. The general tightening torque is about 15-25N・m. Avoid over-tightening, as this may cause deformation of the sealing ring or damage to the threads.

After installation, check the sealing condition between the filter and the base. Start the engine and check for oil leakage.

Package:

Set of 12 Genuine OEM Motorcraft FL910S Engine Oil Filter Ford BE8Z6731AB